홈
>제품소개
>Displacement sensor
SLS 190
On-Line
- Stroke length to 350mm
- 19mm body diameter
- Self aligning bearings, body clamp or flange mounting
- Protective sleeve
- Sealed to IP66
PERFORMANCE
Electrical stroke E mm |
25 50 75 100 125 150 175 200 225 250 275 300 325 350 |
Resistance ±10% kΩ |
1 2 3 4 5 6 7 8 9 10 11 12 13 14 |
Independent linearity |
|
guaranteed ±% |
0.25 0.25 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 |
typical ±% |
0.15 0.15 0.15 0.10 0.10 0.07 0.07 0.07 0.07 0.05 0.05 0.05 0.05 0.05 |
Power dissipation at 20°C W |
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 |
Applied voltage maximum Vdc |
22 44 67 74 74 74 74 74 74 74 74 74 74 74 |
Electrical output |
Minimum of 0.5% to 99.5% applied volts |
Resolution |
Virtually infinite |
Hysteresis (repeatability) |
Less than 0.01mm |
Operational temperature °C |
–30 to +100 (tested to +130 for 12 hours duration) |
Output smoothness |
To MIL-R-39023 grade C 0.1% |
Insulation resistance |
Greater than 100MΩ at 500Vdc
|
Operating mode |
Voltage divider only - see Circuit Recommendation below |
Wiper circuit impedance |
Minimum of 100 x track resistance or 0.5MΩ (whichever is greater) |
Operating force maximum |
|
sealed gf |
500 in horizontal plane |
unsealed gf |
250 in horizontal plane |
Life at 250mm per second |
Typically greater than 100 million operations (50 x 106 cycles) at 25mm stroke length |
Dither life |
200 million operations (100 x 106 cycles) at ±0.5mm, 60Hz |
Sealing |
IP50 standard - IP66 see options |
Shaft seal life |
20 million operations (10 x 106 cycles) - replaceable |
Shaft velocity maximum m/s |
10 |
Vibration |
RTCA 160D 10Hz to 2kHz (random) @ 12.6g (rms) - all |
Shock |
Less than 0.04% output change @ 2500g - all axes |