SLS 130


On-Line
        
  • Stroke length to 200mm
  •     
  • 13mm body diameter
  •     
  • Self aligning bearings, body clamp or flange mounting
  •     
  • Spring operated shaft kit
  •     
  • Protective sleeve
  •     
  • Sealed to IP66
PERFORMANCE
Electrical stroke E mm 25 50 75 100 125 150 175 200
Resistance ±10% kΩ 1 2 3 4 5 6 7 8
Independent linearity  
guaranteed ±% 0.25 0.25 0.15 0.15 0.15 0.15 0.15 0.15
typical ±% 0.15 0.15 0.15 0.10 0.10 0.07 0.07 0.07
Power dissipation at 20°C W 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
Applied voltage maximum Vdc 22 44 67 74 74 74 74 74
Electrical output Minimum of 0.5% to 99.5% applied volts
Resolution Virtually infinite
Hysteresis (repeatability) Less than 0.01mm
Operational temperature °C –30 to +100 (tested to +130 for 12 hours duration)
Output smoothness To MIL-R-39023 grade C 0.1%
Insulation resistance Greater than 100MΩ at 500Vdc
Operating mode Voltage divider only - see Circuit Recommendation below
Wiper circuit impedance Minimum of 100 x track resistance or 0.5MΩ (whichever is greater)
Operating force maximum  
sealed gf 500 in horizontal plane
unsealed gf 250 in horizontal plane
Life at 250mm per second Typically greater than 100 million operations (50 x 106 cycles) at 25mm stroke length
Dither life 200 million operations (100 x 106 cycles) at ±0.5mm, 60Hz
Sealing IP50 standard - IP66 see options
Shaft seal life 20 million operations (10 x 106 cycles) - replaceable
Shaft velocity maximum m/s 10
Vibration RTCA 160D 10Hz to 2kHz (random) @12.6g (rms) - all axes
Shock Less than 0.04% output change @2500g - all axes
Relationship Files

전체선택 전체해지 선택 다운로드