Accessories for outdoor microphones


Accessories for outdoor microphones
The following outdoor-microphone accessories and cables are listed in alphanumerical order.

AC0001
Calibration Control Box for Types 41AM/41CN
The AC0001 is a control box with local and remote facilities for switching on/off the Actuator Calibration of the Outdoor Microphone Systems Types 41AM and 41CN . It also has a BNC output for analysing the signals from these Outdoor Microphone Systems. It can be connected to a 12 – 18V DC mains/line adapter for powering the Types 41AM and 41CN.

AL0001
Desiccator for Type 41AL
The AL0001 is a desiccator unit which is mounted on the bottom of the Environmental Microphone Type 41AL and extends the time in which the Type 41AL can be used outdoors.

AM0009
Windscreens for Types 41AM/41CN/41AL
The AM0009 is a set of five open-cell-structure foam windscreens for mounting on the Outdoor Microphone Systems Types 41AM and 41CN , and the Environmental Microphone Type 41AL.

AM0052
Complete Windscreen for Types 41AM/41CN/41AL
The AM0052 is a windscreen, complete with anti-bird spikes, for mounting on the Outdoor Microphone Systems Types 41AM and 41CN , and the Environmental Microphone Type 41AL .

AM0089
Low-noise Windscreen for Types 41AM/41CN
Spherical windscreen for Outdoor Microphone Systems Types 41AM and 41CN . Fits directly over the existing windscreen, accommodating the anti-bird spikes. Open-cell foam structure 20ppi, 150mm diameter.

RA0009
Adapter for Pistonphone calibration
The RA0009 is an adapter for calibrating the Outdoor Microphone System Type 41AM . It fits over the rain protection cap of the Type 41AM and permits in-situ calibration using a Pistonphone such as the Type 42AA or a Calibrator such as the Type 42AB .

RA0010
Adapter for Pistonphone calibration
The RA0010 is an adapter for calibrating the Environmental Microphone Type 41AL . It fits over the rain protection cap of the Type 41AL and permits in-situ calibration using a Pistonphone such as the Type 42AA or a Calibrator such as the Type 42AB.

RA0041
Adapter for Pistonphone calibration
The RA0041 is an adapter for calibrating the Outdoor Microphone System Type 41CN . It fits over the rain protection cap of the Type 41CN and permits in-situ calibration using a Pistonphone such as the Type 42AA or a Calibrator such as the Type 42AB.

Extension cables for outdoor microphones
The extension cables for the Outdoor Microphone Systems Types 41AM and 41CN (and the earlier Type 41CM) are high-quality PUR cables with a doubled-screened signal wire, terminated by 6-pin LEMO 2S connectors (for extension cables for the Environmental Microphone Type 41AL, see above under Accessories for Preamplifiers). See data sheet for details of available cable lengths.
Relationship Files

전체선택 전체해지 선택 다운로드