Type 40PS


Type 40PS
The Surface Microphone Type 40PS is a low-cost microphone for general purpose measurements on planar and curved surfaces. It has a wide useful frequency range reaching up to 20 kHz and a large dynamic range topping at around 136 dB.
It has an integrated CCP1 preamplier and is delivered with a built-in TEDS2 chip which enables it to be programmed as a complete unit. The Type 40PS requires a constant-current power supply, e.g. the G.R.A.S. CCP Supply Type 12AL, or any other CCP compatible power supply.
Close manufacturing tolerances together with the advantages of the TEDS chip, provide the Type 40PS with a high degree of interchangeability; a major advantage which excludes accounting for individual characteristics.
The Type 40PS is both stable and robust. It has an integrated 1 m co-axial cable with a microdot connector and is delivered with a supple detachable silicon-rubber fairing.
Because of its lightness, the microphone with fairing can readily be mounted on surfaces using double-sided adhesive tape.
Specifications Type 40PS
Specifications Type 40PS
Nominal sensitivity:
5 mV/Pa at 250 Hz
Dynamic range (upper limit):
136dB re. 20μPa (without clipping)
Dynamic range (lower limit):
< 32dBA re. 20μPa (thermal noise)
Frequency response:
100 Hz - 3 kHz (±1 dB)
20 Hz - 10 kHz (±3 dB)
20 Hz - 20 kHz (±6 dB)
Output connector:
Coaxial microdot
Temperature Range:
-20 °C to +80 °C
Output impedance:
< 50 ohm
Output cable:
Integrated with coaxial microdot connector
Cable length: 1.5 m
Cable diameter: 1.1 mm
special: on request
Thickness:
2.8 mm
Diameter:
40 mm (with fairing)
13.2 mm (without fairing)
Weight:
3 g
Relationship Files

전체선택 전체해지 선택 다운로드