EMAX


EMAX Product Information
On-Line Electric Motor Analyzer
동적 시험기로서 Emax는 전원을 차단하거나 생산을 중단하지 않고 모터가 작동되는 동안 데이터를 수집하여 모터와 관련 회로를 정확하게 평가합니다. Emax는 전류와 전압의 3상을 동시에 평가하여 전력 품질과 효율 데이터에 더하여 회전자, 고정자, 공극, 전력 회로, 그리고 전력 품질의 결함을 조기에 발견합니다. In-rush/start-up 전류 감지와 공정 분석 처리 능력을 가진 Emax는 이 분야에서 가장 완전하고 정확한 동적 시험기입니다.
- Portable and battery powered
- Monitors Power Quality, Power Circuit, Stator, Rotor, and Air Gap
- Low, medium, and high voltage motors
- Six channel simultaneous acquisition
- Torque and efficiency analysis
- Impedance and phase angle measurement
- Power and current signature tests
INTRODUCING EMAX
Demands in today's industry require motors to run as often as possible. Most proactive companies want to employ predictive maintenance practices on their motors. However, this valuable act can be a double-edged sword—important to do, but often requiring the motor to be shut down for access. Finally, there is monitoring equipment available that gives you the best of both worlds. EMAX, from PdMA Corporation, is a portable dynamic tester that evaluates electrical motor condition without shutting down your process.
POWER ANALYSIS
The power analysis portion of the equipment provides valuable insight into incoming power quality, power circuit condition, stator health and motor efficiency. The three phase current and voltage signal is captured in just seconds and then stored for diagnostics and trending. Power quality is diagnosed through total harmonic distortion (THD) and crest factor calculations. Distortion in the signal, often the result of nonlinear loads, produces additional heat within the motor that will reduce life if not acted upon.
The power circuit and stator fault zones are evaluated through current parameters and sequence data. Balances in the voltage, current and impedance are combined with negative and zero sequence currents to identify winding or connection problems. Unlike the positive sequence currents that produce useful torque, negative sequence currents are caused by high resistive connections within the motor or circuit and generate heat-producing counter torque. Rising negative sequence currents coupled with a high impedance and current imbalance are indicative of developing stator faults.
CURRENT ANALYSIS
Current analysis is performed through a combination of spectral graphs and software automation. Utilizing this portion of the equipment, the user can identify defects in the rotor and air gap fault zones and record motor startup.
Spectral current is collected in one of three ways: high resolution, low resolution or eccentricity. Each uses different sampling rates and resolutions to identify anomalies in a specific fault zone. Rotor bar defects and eccentricity, static or dynamic, can be detected and trended. Startup, arguably the most stressful and informative time in motor operation, is recorded from start to finish. Graphing in-rush current and startup time is extremely valuable when evaluating motor operation and condition. Certain changes in the startup characteristics can be attributed to rotor or stator faults. Additionally, current profiles for operations can be recorded, trended and compared. This can be an effective method for evaluating equipment or machinery involved in plant processes.
TRENDING & REPORTING
Trending data is a critical element in any condition monitoring process. But, spotting motor trends is most effective if the data collected can be organized and viewed as quickly and efficiently as it's captured. EMAX generates valuable reports immediately after testing, enabling you to assess the condition of your motors in the field or trend the data for later use.
EMAX reports include a series of graphs, screen plots and historical comparisons. These reporting capabilities clearly illustrate the status of rotors, stators, power quality and other fault zones, allowing you to discover and evaluate possible problems before they result in lost productivity from forced downtime. When combined with the MCE, the EMAX provides the most comprehensive condition analysis equipment available in a single package.
Finally, with the professionals at PdMA Corporation behind this product, you can always rely on our expertise and technical support. Call on us for assistance in maximizing your electrical reliability efforts.
Data Includes:
• Current Spectral Analysis
• High Frequency Eccentricity Analysis
• In-Rush/Start-Up
• Phase-to-phase Voltage RMS
• Line-to-Neutral Voltage RMS
• Voltage Imbalance
• Crest Factor
• Total Harmonic Distortion (THD)
• % Full Load Amps
• Average Current RMS
• Phase Current RMS
• Phase Impedance
• Impedance Imbalance
• Power (KW, KVA, KVAR)
• Power Factor
• Efficiency
• Output Power
• Torque
• More...
Environment Specification
Dimension:
    18.5 x 14.5 x 6 in. / 46.99 x 36.83 x 15.24 cm.
Weight:
    19 – 23 lbs. / 8.62 – 10.43 kg.
Lead set:
    Four 8 ft. (2.44 m.) fused voltage leads for 3 phases and ground.
    Voltage probe accessory kit
    Three 15 ft. (4.57 m.) AC/DC current probes for three phases
Environmental Operating temperature:
    41℉ to 95℉ / 5℃ to 35℃
Storage temperature:
    -4℉ to 104℉ / -20℃ to 40℃
Humidity:
    20% - 80% non-condensing
Relationship Files

전체선택 전체해지 선택 다운로드