Thermal Shock Chambers

Thermal Shock Chambers - Air to Air
ESS (Environmental Stress Screening) Chambers
The TSV, TSH, TSD Series

What is ESS?
ESS는 육안 검사 또는 전기 검사로 감지 할 수 없는 결함이 있는 부품이나 공정 문제와 같은 결함을 밝혀내는 검사 제품의 하나 입니다. 전자제품의 제조과정에서 제품의 결함과 제작 과정에서의 결함을 밝혀 내기 위해 계발되었으며 파손을 밝혀 내기 위해 열 사이클링과 진동을 이용합니다. Environmental stress screening chambers은 제조과정이나 신제품의 시험에 사용 가능 합니다. Russells사의 air-to-air thermal shock chambers는 전세계에 설치되어 오늘날의 environmental stress screening의 요구조건들을 충족시키는 것을 입증하고 있습니다. 자사의 고온과 저온 사이의 직접적인 변환 이론은 열 충격 또는 빠른 온도 변화가 있는 부분을 획득하는데 경제적인 이론입니다.
Thermal Shock Chambers
Russells air-to-air thermal shock chambers are available in three configurations:
  • TSV Series Two Zone (hot/cold) Vertical - direct hot/cold transfer
  • TSH Series Three Zone (hot/ambient/cold) Horizontal - direct hot/cold transfer with selectable ambient temperature dwell required for some MIL-STD's.
  • TSD Series Double Duty (hot/cold/hot) - direct hot/cold transfer with additional hot zone and second transfer carriage effectively doubles throughput capacity for high volume production.
  • Sizes from 30 l (1 cu ft) to 450 l (16 cu ft) capacity
  • Cold zone temperatures to 73° C (-100° F)
  • Hot zone to 200° C (392° F)
  • Automatic transfer of test specimens between zones
ESS Chambers for temperature cycling environmental stress screening:
  • Cascade low temperature to -73° C (-100° F)
  • Single stage to -20° C (-4° F)
  • High temperature to 177° C (350° F)
  • Transition rates to 30° C/min (54° F/min)
  • Humidity from 20% to 95% RH.
  • Available with passive or power product fixturing
  • Cart based or backplane style
Thermal Shock Chambers Features:
  • Chamber liners heliarc welded and dye checked brushed 300 stainless steel.
  • Fiberglass insulation, urethane foam insulation
  • Welded structural steel frame.
  • Service panels removable with 1/4 turn fasteners
  • Chamber fan motors externally located.
  • Dual silicone door gaskets.
  • Cold Chamber drain.
  • Microprocessor temperature programmer controller
Russells TS-Series thermal shock chambers are available in sizes from 2 to18 cu./ft.. A Russells application engineer can assist you in selecting the chamber configuration and size that is most economical for your testing needs. Let Russells give you the competitive edge!

Thermal Shock Chambers Performance:
  • Temperature range for mechanical refrigeration:
    -99°F/-73°C to 392°F/200°C
  • Temperature range for liguid nitrogen refrigeration:
    -301°F/-185°C to 392°F/200°C


  • 202E, 107D conditions A, F
  • 883D, 1010.7 conditions A, C

  • Low or zero ozone depletion refrigerants.
  • Cascade or liquid nitrogen cooling.
  • Energy saving refrigeration bypass capacity control.
  • Low stage desuperheater.
  • Oil pressure switches.
  • Compressor suction and discharge pressure switches.
  • Water cooled condenser on mechanical refrigeration models.
  • Vapor tank and condenser ASME certified.
  • Compressor overload protection.
  • High stage compressor crankcase heater.
  • Compressor head fans.
  • Low stage oil separator.
  • All piping joints silfos or silver soldered.
  • Stainless steel compressor condensate parts.
  • All writing meets NEC standards
  • 120 volt control circuit transformer.
  • Fully enclosed electrical panel.
  • All circuits fuse of circuit breaker protected.
  • Full system function switches with system status pilot lights
  • Incandescent interior lighting
  • All wiring numbered or color coded.
  • High temperature limit safety.
  • Master heating circuit contactor.
  • Air circulator/heater interlock.
  • Balanced load on 3 phase power.
  • Chamber door interlocks.
Optional Accessories:
  • Traveling access port to transfer basket.
  • Transfer basket shelves or fixturing.
  • Viewing windows.
  • Refrigeration gauges.
  • Refrigeration sound deadening package.
  • Remote refrigeration systems.
  • LN2/CO2 boost cooling.
  • Air cooled condenser.
  • Dry air purge system.
  • Running timer meter.
  • Electrical disconnect switch.
Optional Instrumentation:
  • VS‐1 PLC programmer/controller
  • Product safeguard redundant over/under temperature limit.
  • Circular or electronic chart recorders.
  • Computer communications, networking, data‐logging software.
  • Free standing remote instrument console.
Relationship Files