eDAQ-Lite


Specification
Physical
  • Size: 17.46cmW x 14.29cmL x XcmH
  • Weight: X kg
  • Operating Temperature: -20° to 65° C
  • NOTE: X is a variable that is dependent on the configuration of the system.

Enclosure
  • Sealed System: Machined Aluminum case and sealed gaskets protect the system from humidity, corrosion, water spray, and dust.
  • Vibration Tested: Swept sine tested from 5 to 2000 Hz @ 20 G’s
  • Modular:Up to 8 layers can be custom configured pending testing requirements.

System
  • Input Power:
  •  ELCPU : 10-18 VDC
     ELCPU-PLUS: : 10-60 VDC
     Internal Back-up Battery
  • Sample Rates: Master Clock Rates 100 kHz = 0.1Hz to 100 kHz98.3 kHz = 0.1 Hz to 98,304Hz
  • Communications : Ethernet 100 BaseT Serial RS232 up to 115,200 baud
  • Memory : Internal Flash 4GB, 8GB, 16GB, 32GB

ELCOM
Overview
The Vehicle Network Communications Layer (ECOM) offers
(3) CAN device interfaces, (1) Vehicle Bus Module (VBM)
interface and a GPS communications port.

Specifications
Five communications channels; (3) CAN, (1) Vehicle Bus

Module (VBM) and (1) GPS.
• Size: 175mm W x 143mm L x 1.76mm H
• Board Weight 0.42kg
• Inputs: (3) High Speed CAN

(1) Vehicle Bus Module (VBM)
(1) GPS Communications

ELHLS
Overview
The Simultaneous High Level Board (EHLS) offers 4
simultaneously sampled high-level differential analog inputs
through independent connectors.

Specifications
• Size: 175mm W x 143mm L x 1.76mm H
• Weight: 0.42 kg
• Inputs: Minimum full–scale range ±62.5mV
    Maximum full–scale range is ±80V
• Resolution: 16-bit ADC, across specified full-scale range
• Sample Rates: Independently set from 0.1Hz to 100kHz
• Transducer Power: 4V to 15V in 1V increments, 500mW per channel
• Analog Out Option (EHLS-AO): +/- 10V output

ELBRG
Overview
The Bridge Board, or EBRG, offers 4 low level, simultaneously sampled differential input channels through independent 6-pin Turck connectors.

Specifications
• Size: 175mm W x 143mm L x 1.76mm H
• Weight: 0.42 kg
• Excitation: 5V (Bipolar ±2.5) or 10V (Bipolar ±5)
• Inputs: Minimum full–scale range ±3mV
    Maximum full–scale range is ±10V
• Sample Rates: Independently set from 0.1Hz to 100kHz
• Resolution: 16–bit ADC
• Support 1/4, 1/2, full bridge
• Four shunt calibration resistors per channel

ELNTB
Overview
The ELNTB measures temperatures on 16-channels of non-isolated thermocouple conditioning.

Specifications
• Size: 175mm W x 143mm L x 1.76mm H
• Weight: 0.39 kg
• 16-channels of non-isolated thermocouple signal conditioning.

• Type Range
 -K Type -200 deg.C to 1372 deg.C
 -T Type -200 deg.C to 400 deg.C
 -E Type -200 deg.C to 1000 deg.C
 -J Type -200 deg.C to 1200 deg.C

• Sample Rates: 0.1Hz to 5Hz maximum
• Accuracy: ±0.5oC typical

ELDIO
Overview
The EDIO is an extremely versatile board that can measure digital inputs/outputs, pulse counters, quadrature decoders, vehicle bus, as well as GPS.

Specifications
• Size: 175mm W x 143mm L x 1.76mm H
• Weight: 0.42 kg
• Sampling for WAAS GPS option: 1Hz
• Can network eDAQ/eDAQ–lite with GPS sync clock
• Six pulse counters with software selectable modes:Width Period, On Period, Rate, Quadrature Decoder
• Excitation Voltage: +5 or +12Vdc, single–ended, boardwide. Isource = 1A max
• Vehicle Bus Inputs via Optional Vehicle Bus Modules:CAN, SAE J1708/J1587, and SAE J1850/VPW
Relationship Files

전체선택 전체해지 선택 다운로드